Share the post "Bike Check #012 | Sébastien Clavier: steel, but never old-school"
A three-time UFOLEP national mountain bike champion, Sébastien Clavier has always had two obsessions: riding fast and understanding exactly what goes onto his bikes. An ultralight gear enthusiast, a tinkerer at heart, and capable of dreaming up builds no one else would have thought of, he could have chosen the most sophisticated carbon on the market. Instead, for more than five years, he has been riding a custom steel hardtail mountain bike made by Tsomina. A 1.96 kg frame, Columbus tubes chosen one by one, a dropper post added after a crash, and enough evolutions that this bike has become almost impossible to replace.
By Jeff Tatard – © Photos: Seb Clabier & BSLYK
With Sébastien Clavier, a bike is never truly finished. One part arrives. Another leaves. You have to shave a few grams, test an idea, find a cleaner solution, or simply try something because no one else has done it yet. The gear is almost as much a part of the fun as the bike itself. And yet, amid this constant rotation of components, there is an exception. A frame.
Sébastien is a three-time UFOLEP national mountain bike champion and remains first and foremost a huge gear nerd. Lately, he has been riding more on the road for a change of scenery, but mountain biking has never truly left the garage. And steel even less so. “My bike? Steel is real, as they say in the community.” Welcome to 3bikes Bike Check #012.
What is your bike?
A custom steel Tsomina, made in late 2021. And unlike many Bike Checks where you start by reciting a long list of components, here, the true centerpiece cannot be removed with an Allen key. It is the frame.
Sébastien wanted something light, comfortable, and perfectly suited to his riding style. A project that led him to think precisely about the choice of tubes and how they behave. The result blends various Columbus Spirit, Life, and Zona tubes. “I went very light. In particular, there are tubes used mainly on the road.”
The frame weighs around 1.96 kg. Which, for steel, already gives a fairly clear idea of the specifications. The geometry is personal as well. Sébastien started from several frames he knew and felt comfortable on before making a few modifications. The bare frame, custom-made and painted, cost him around 1,850 euros.
As for the price of the complete bike? “No idea. I am always looking for the best quality/price/weight ratio.” Probably the most Sébastien Clavier answer possible.
Why this bike?
Because Sébastien loves steel. Really. His first “real” bike was already steel: a Starway X235 in True Temper TT Lite, which he still owns. And the story is quite funny: after a chainstay broke about twenty years ago, the frame was welded back together by… Levacon. With the arrival of 29-inch wheels, Sébastien then regularly used steel frames during the winter. Sobre Dad. Cotic. Custom SingleBe. Bikes he would ride for a few months before reselling them.
Then, about five years ago, his brother told him about a friend who builds frames, mostly road bikes. Why not ask him for a mountain bike? And above all: why not make it exactly the way Sébastien wanted? “I was looking for a winter bike. I told myself: why not make a custom frame?”
The project would take time. He had to find the right tubes, think about the geometry, and keep what Sébastien loves about steel: that blend of comfort, silence, and compliance. Back then, he jokes, there was no Gemini or ChatGPT yet to help him choose his tubes. So he did it differently. He searched. He tested. And above all, he talked with the person who was going to build his frame.
How did you build it?
The answer could be: several times. Because since 2021, parts change regularly. The frame, however, remains. Sébastien notably used a Zirbel remote, which he loved for its discretion and ergonomics. It allowed for a particularly clean cockpit.
Unfortunately, it no longer works at the time he answers our Bike Check. So he had to go back to a SRAM Pod. And his verdict is harsh: “Very unsightly… and not super ergonomic in my opinion.” But the real recent evolution of the bike came after a much less glorious episode. A crash. While stationary.
Following an evening apparently successful enough for Sébastien to admit himself that going for a ride the next day was perhaps not his idea of the century. The top tube hits a barrier. And bends. “Really not pretty.” Sébastien contacts Tsomina. Good news: no need to write off the entire frame. The tube can be replaced. And since the bike is heading back to the workshop, might as well make the most of it. The new top tube is installed, but Sébastien also requests several modifications.
Ever since he discovered the dropper seatpost, he refuses to ride without one. Tsomina therefore performs the necessary routing inside the frame to cleanly integrate the cable housing. Conversely, the old cable guides used for the rear derailleur housing become useless with AXS. They disappear. And the frame receives a new powder coat finish. Repair rather than replace. And improve along the way. Hard to find a philosophy more consistent with this bike.
So? Out on the trail, how does it ride?
Exactly what Sébastien had imagined. And given his level of demand regarding equipment, that is no small victory. “It’s comfortable, it rides silently… I love it!”
He particularly appreciates the compliance of steel, that slight flex he deliberately sought out and which, according to him, assists the rider on climbs. This hasn’t stopped him from stepping onto the podium with it several times. The frame was initially designed around a 100 mm fork. Over time, Sébastien realized he actually preferred 110 or even 120 mm of travel. This notably helps absorb roots better. He then compensates for the geometry change with a more negative stem.
And since the arrival of the dropper post, descents have become even more fun. “A blast! Well, you quickly get brought back down to earth when you let off the brakes too much… it’s not a full-suspension bike after all!” There is still a limit. On the road, descending when he has to turn left, Sébastien feels more flex in the rear triangle, amplified in his view by a relatively low tire pressure. There, the bike can feel a bit “mushy.” But in the forest? “Instant smiles!”
His rating is therefore unsurprising: 9/10. And for someone who changes components this regularly, another figure is perhaps even more telling. The frame is still here more than five years later.
Someone steals it tomorrow? Would you buy the exact same one back?
For once, Sébastien doesn’t really have an answer. “Honestly, I don’t know what I’d go back to.” It would depend first on his racing ambitions. If he decided to return 100% to mountain bike racing, his choice might be different. If he stuck to a freer riding style more focused on pure enjoyment, this Tsomina would probably still have plenty of arguments for it. And when asked what he would change today, he doesn’t even mention the frame. He dreams instead of a lighter or more spectacular wheelset. Bike Ahead 3-spoke wheels, for example. “Just for fun.”
He also would have loved to keep the frame raw. Unpainted. Just bare steel. Unfortunately, that wasn’t really feasible to properly protect the material. So it will stay painted. But always in steel.
Sébastien’s Bike Check
Sébastien’s word: “Steel is real.” For someone who loves swapping parts, experimenting, and constantly searching for the best compromise between weight, price, and efficiency, keeping the same frame for over five years is probably the ultimate compliment. It has been built, taken apart, modified, crashed, repaired, and then improved. And even today, when Sébastien heads back into the woods with it, he rediscovers exactly what he asked for from the start. Lightness. Comfort. A bit of compliance. And above all, smiles. Ultimately, Sébastien’s cleverest build is perhaps the one he hardly needs to touch anymore. |
Same concept. Another bike.
One bike. Four photos. Four questions. Four answers. Bike Check, the 3bikes series that cares less about what a brand says about a bike than why its owner chose to ride it.
=> To discover Sébastien’s work and builds around his Tsomina.
=> And here, if you want to discover all our other Bike Checks: All our Bike Checks See all our articlesBike Checks
Share the post "Bike Check #012 | Sébastien Clavier: steel, but never old-school"














