Stages Power offers power meters based on the new Shimano 12-speed cranksets

Stages Power power meters for Shimano Dura-Ace R9200 and Ultegra R8100 are available as Stages Power L (left-side), Stages Power LR (dual-sided), and Stages Power R (drive-side) options. The sensors are compatible with all frames that fit Shimano Hollowtech II cranks.

Stages Power has partnered with three consecutive Tour de France winners. Competition is the best testing ground in the world, and Stages Power has now proven itself with the most demanding riders.

Active Temperature Compensation (ATC) as standard equipment

Measurement consistency is the most important characteristic of a power meter. Stages Power was the first sensor to integrate automatic temperature compensation, thus ensuring an accurate reading regardless of environmental conditions. ATC is the main reason a rider can trust Stages Power data in all conditions.

Individual sensor calibration for more accurate results

Each Stages Power sensor is individually factory calibrated to ensure the industry’s best level of accuracy at +/- 1.5% (non-scientific sensors). Individual calibration means you can trust the bilateral data produced by the sensors, as it is a real measurement and not an estimate.

Accuracy: +/- 1.5% accuracy in all conditions
Compatibility: profile less than 5 mm. Tool-free battery replacement on the left crank and with Phillips screws on the drive side
Weight: adds only 35 g (Stages Power LR) / 15 g (Stages Power L) / 20 g (Stages Power R) to the weight of the cranks.
Battery life: 175+ hours (Stages Power LR, with 2 CR2032 batteries), 200+ hours for a single crank (Left or Right)
Power measurement: 0 – 2500 watts

Stages Power R for increased compatibility

The new generation of Stages Power Shimano cranksets offers increased compatibility with almost all bike models. However, some bike models are not compatible with the left crank due to interference with the sensor. For example, bikes equipped with rim brake calipers mounted under the bottom bracket shell.

FACTORY INSTALL SERVICE

Stages Cycling offers to mount its power meters directly on the consumer’s crank: left, right, or left-right.

Prices

Stages Power L
Lengths 160mm, 165mm, 167.5mm, 170mm, 172.5mm, 175mm, 177.5mm, 180mm,
Ultegra R8100: 459 €
Dura-Ace R9200: 549 €
Factory Install: 299 €

Stages Power LR
Lengths 160mm, 165mm, 170mm, 172.5mm, 175mm
Chainring 50/34, 52/36, 54/40
Ultegra R8100: 879 €
Dura-Ace R9200: 1199 €
Factory Install: 599 €

Stages Power R

Lengths 160mm, 165mm, 170mm, 172.5mm, 175mm
Chainring 50/34, 52/36, 54/40
Ultegra R8100: 529 €
Dura-Ace R9200: 749 €
Factory Install: 299 €

Additional Features

Active Temperature Compensation
Cadence measurement via accelerometer or possibility to use a “Hall-Effect” system with magnet (coming soon)
Wireless Firmware updates with the Stages Cycling app
LED indicator for visual display of battery charge level and zero reset confirmation without app or GPS
Improved accelerometer and added gyroscope for better cadence accuracy
Improved BLE and ANT+ connectivity offering better data transmission stability

Compatibility

Compatible with all Shimano Hollowtech II cranks.
Compatibility with most frames, see fit guide in the Support section
Software compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center and many others
Device compatibility: ANT+, BLE, Bluetooth Smart Ready

In the Box

Power sensor(s) on the left and/or right crank
High-quality CR2032 battery(ies)
Cranksets are equipped with Shimano chainrings
Lifetime access to Stages Link for sensor management and firmware updates
2 months free access to Stages Link Premium preparation and coaching features
Product identification card with serial number and ANT+ ID.
User manual

Contact: www.stagescycling.com

Source: CP

=> SEE ALSO: All our New Products articles